|
|
Metallic Yarns for textile applications
Metallic yarns
Chemical
characteristics
| Ironing |
110°C,15 sec |
| Dry Heat |
180°C, 60 sec |
| Alkali, Solution of 1st Process |
P.H.4.7,°C, 30 min |
| Hot Water |
90°C, 30 min |
| Hand Washing |
0.5 % soap
0.2 % Sodium Carbonate Anhydride
60°C, 30 min. |
| Rubbing |
200g, 100 times |
| Dry Cleaning |
Trichloroethylene
Perchloroethylene
Petroleum Benzene
25°C, 30 min. |
| Steaming |
100°C, 40 min. |
| Boiling Water |
30min.-1hr. |
| Acid |
2% Oxalic Acid, 60°C, 10min.
2% Acetic Acid, 60°C, 10min. |
Scouring For Nylon,
Polyester, Rayon,
Acetate&Cotton |
Soda Ash, 1g/l
60°C, 30 min. |
| Customs tariff number |
5605.00.1000
|
|
|
|
Production
process
| Coating process : Aluminum metallized
PET ( polyester ) film is lacquered with protective epoxy resin to keep a shiny
looking metallized surface. In case of Gold and colors, appropriate
quantity of metal complex dyestuffs are mixed with Resin measured by an
accurate electronic scale. Our most concern, tension control, starts at
this process. Our machine is equipped with fully automatic tension
control, temperature control and web guide devices |
 |
| Wide cutting / Pancake process :
Protective lacquered film is cut into 2” to 5” wide pancakes. Our
machine is equipped with fully automatic tension control, web guide and
oiling devices. |
 |
|
Micro slitting & winding process : Wide cut pancake roll is
being slit into various sizes while film passes through a cutting head and
being wound on spools ( Max. 450pcs of spools ). This process requires
intensive tension control. Our machine is equipped with fully automatic
tension control and oiling devices. Moreover our Korean technician is
highly skilled for more than 30 years to control slitting tension. |
 |
|
Bobbin winding process : 20D PA-6 / Nylon mono filament yarn is
spooled on well balanced bakelite bobbins. |
 |
|
Single/Double covering process : M-type metallic yarn is
covered/twisted/supported with 20D PA-6, 2ends at 280TPM +/- 5. TPM is
regularly checked with Stroboscope. |
 |
|
Single Covering process : Viscose rayon, or Polyester yarn is
single covered with M-type metallic yarn. |
 |
|
Vacuum setting process : MH, MHS and ST types are steam set to
remove self-tangling effect. |
 |
|
Cone winding process : MX, MH, MHS and ST types are re-wound into
tapered paper cones. Our tension control by an accurate gauge is being
finished at this process. |
 |
Available
types
M TYPE
Slit metallized Polyester film ( aluminum metallized and
protective epoxy resin coated ) into various sizes of 1/32”, 1/69”, 1/85”,
1/92”, 1/100”, 1/110” and 1/134” wound on ABS bobbin ( flange )
Basic colors : Silver and Gold.
Available colors on request :
Brown, Blue, Green, Pink, Purple, Red, Black etc.
Special colors on request :
Rainbow/pearl, Multi-color, Fluorescent,
Transparent, Mat color etc.
Available thickness : 12Mic., 15Mic./PA film, 16Mic./non-metallized, 25Mic.,
30Mic./Laminated etc.
Available width : 1/134”, 1/110”, 1/100”, 1/92”, 1/85”, 1/69”
and 1/32”.
ABS bobbins/spools :
M-type to be supplied in the weight of 100g, 150g and 300g
per spool.
Use
This is widely used in pre-dyed textiles (weaving), embroidery ,velvet , laces, ribbons, accessories, industrial
subsidiary materials, interior decoration, kitchen scrubber etc.
MH TYPE
Supported Yarn
M-type metallic yarn supported with Viscose
rayon 120D or Polyester filament yarn 150D. To be supplied 500g/cone
after vacuum steam setting process to prevent from self-tangling problem.
This product feels soft and has sober lustrous effect.
Use
This product is used in sweaters ,knitwear , tricots, weaving, embroidery, high
fashion and other clothes.
MX TYPE
Twisted Yarn
M-type metallic yarn supported with PA-6
20D/1F X 2ends ( 1 end covered clockwise, 1end covered counterclockwise
at 280TPM ) and wound 500g per conical tube ( cone ). The yarn has strong tensile strength and graceful, lustrous color.
Use
This product is used in sweaters, knitwear, tricots, pre-dyed textiles weaving), embroidery, stocking, accessories, industrial subsidiary materials etc.
MHS TYPE
Viscose rayon or Nylon yarn round covered with M-type metallic yarn at the
spaced regular intervals. To be supplied 250g, or 500g/cone after vacuum setting
process to prevent from self-tangling problem.
ST TYPE
Viscose rayon, or Polyester filament yarn round covered with M-type metallic
yarn at the fully closed regular intervals. To be supplied 150g, 200g, 250g, or
500g/cone after vacuum steam setting process to prevent from self-tangling
problem.
Color cards
| M type |
MH type |
MX type |
ST & MHS type |
 |
 |
 |
 |
technical yarns |
specials |
|
TYPE
|
WIDTH
Flat metallic yarn
|
TWISTED YARN
|
LENGTH/KG
Silver / Colors
|
DENIER
Silver / Colors
|
|
M
|
1/32”
1/69”
1/85”
1/100”
1/110”
|
|
65,000M / 61,000M
140,000M / 130,000M
176,000M / 163,000M
204,000M / 191,000M
225,000M / 209,000M
|
138D / 147D
64D / 69D
51D / 55D
44D / 47D
40D / 43D
|
|
MX
|
1/69”
1/85”
1/100”
|
Nylon mono
Filament yarn
20D/1F x 2
|
86,000M / 82,000M
106,000M / 103,000M
|
104D / 109D
85D / 87D
|
|
MH
|
1/100”
|
Viscose Rayon.
Or polyester(PFY)
75D, 120D,
150D
|
78,000M / 76,000M
|
115D / 118D
|
|
MHS
|
1/100”
|
Viscose Rayon.
Or polyester(PFY)
75D, 120D,
150D
|
55,000M / 54,000M
|
164D / 167D
|
|
ST
|
1/64”
1/69”
|
Viscose Rayon.
Or polyester(PFY)
75D, 120D, 150D
|
39,000M / 38,000M
39,500M / 38,500M
|
230D / 237D
228D / 234D
|
Bobbin size
(for M-type)
1) 80mm/OD x
47mm/ID x 98mm/L : Approx. 300grms./Bobbin.
2) 70mm/OD x
42mm/ID x 68mm/L : Approx. 150grms./Bobbin.
3) 56mm/OD x 30mm/ID x 64mm/L : Approx.
100grms./Bobbin.
|
