|
|
Innovative solutions to boost your textile and industrial product's
performance
Separating, bonding and
combi-yarns
and fibers for non woven
Swicofil is your partner to help you improving your
textile and industrial textile product performance, to find new solutions
for existing products, to explore new product design possibilities.
Segment |
Co-Polymer
|
Separation
Yarn |
|
Fusible
Bonding Yarn |
|
Combi
Fusible Bonding Yarn |
|
Co-polymer
core/sheath fiber |
|
Separating, bonding and combi-yarns for embroidering, knitting,
weaving, ready-to-wear apparel and for many new-to-be-developed
applications.
Our supplier partner has specialized for many years in rational bonding and strengthening methods for all kinds of textiles.
Multifilament special products made of CO-PA and CO-PES, are low-temperature separation and fusible bonding yarns, produced under a quality assurance system according to ISO 9001. In addition, they also completely satisfy the human ecological requirements of the Eco-Tex standard 100.
It is difficult to imagine the modern textile industry and its periphery without these
speciality yarns. They serve to simplify process steps i.e. for rationalization, but are also important for improving the quality of articles not otherwise economically feasible.
The variety of application possibilities for our products in knitting, chenille and band production or for labels, embroidery, raschel lace and the ready-to-wear apparel industry, can be classified in three important product assortments:
-
Separating yarns
Separation yarns have proved successful in the production of
knitted panels for making-up into men's, ladies and children wear
and also in the sock and stocking industry. They are made of
co-polyester or co-polyamide in finenesses from dtex 75 to 390 with
melting points of 60, 85 and 110°C (suitable for products which
contain wool, acrylic and polyamide) and with 135 and 160°C
(cotton). A special thread which melts at about 60°C has been
developed for separation bobbin lace.
-
Fusible bonding yarns
Fusible bonding yarns have a multitude of potential uses in the
textile industry, including bonding of:
- trouser waistbands
- sheathing for bra underwiring
- iron-on woven labels
- elastic support tapes for securing picot edging
- chenille yarns
- curtain tapes etc
They are of co-polyamide and are produced in finenesses from 23 dtex
to 840 dtex with melting points of 60, 85, 110 and 140°C.
Using these yarns helps to improve and rationalize production
processes.
-
Combi yarns
Our multifilament combi fusible bonding yarn consists of a fusible
yarn twisted with a supporting yarn of normal melting point made
from polyester or polyamide filaments. The fusible component in the
combi yarn, used as the under-thread in the seam, is caused to melt
and fuse by application of heat, whilst the supporting thread
remains held in the seam with the top yarn. These yarns are supplied
in finenesses of 45, 110, 200, 400, 900 and 1100 dtex and with
melting points of 84 and 140°C.
Such yarns are used for:
- iron-on attachment of embroidery
- edge reinforcement of rachel lace
- fusing of seams. collar bands, chest pieces in men's and ladies
outerwear
-
Core / sheath
bi-component fiber PA 6 / PA 6.6
|